HAM Radio Controller for the Raspberry PI

all inputs/outputs are protected against RF interference by PI filters

2 pcs. high current output (10A) with check diodes (open collector)
14 pcs. Universal outputs with optional

• Open Collector
• Pullup 3,3V
• Pullup 5,0V
• Pullup U-supply

• 4 pcs. Inputs especially for pushbuttons or encoders
• 8 pcs. universal inputs 0 .. 3,3V or higher voltages selectable by resistor
• 2 pcs. opto coupled inputs

• 4 pcs. Universal ADC inputs, 12 bit resolution 0 - 3,3V
• 2 pcs. Inputs for NTC (temperature measurement)
• 1 pcs. current measuring input using a shunt in the positive supply line
• 1 pcs. voltage measuring input, maximum voltage configurable by resistor divider

• RS232 protected with optocoupler and therefore also suitable for long external lines
• Icom CIV interface protected by optocoupler and therefore also suitable for long external lines
• any other serial interfaces by additional USB/serial converter